A History Of The Dalek Props In Doctor Who From '63 To '88 (Pt 8)

8: ‘The Curse of the Daleks’

Events from Dec 65 to Jan 66

Operators

John Scott Martin
Robert Jewell
Kevin Manser
Gerald Taylor

Voices

Peter Hawkins
David Graham


Theatre Poster for Curse of the Daleks

One of several differences between the new
Curse props and previously-built Movie Daleks

The new batch of five props

A Quintet of New Props with a Big Future

Eager to exploit his rights over the Daleks without the involvement of The Doctor or the TARDIS, Terry Nation collaborated with David Whitaker to create a Dalek adventure set on Skaro which exploited the Dalek mythology without relying upon the BBC.
The result was a play produced by John Gale called The Curse of the Daleks which ran for two weeks at London's Wyndham Theatre, starting on December 21st 1965. This was in the middle of the broadcast of the immense twelve-parter The Daleks' Master Plan and interest in the Daleks was starting to wane as the shops filled up with cynical merchandise.
For the purposes of this production a set of Daleks was needed and surviving paperwork states that five new props were built. Paperwork can occasionally be misleading or unclear so, for the avoidance of doubt, a number of features can be used to confirm these were new props.
The centre-lines of their shoulders have a large ridge or seam. The fact that it is identical on each prop demonstrates that this imperfection is in the mould itself. Excluding the Black Dalek, those props that survived of the seven original Movie Daleks had their seam sanded down to a greater or lesser extent. Broadly speaking, the area between the gunboxes of the first batch of Movie Daleks was smooth- The Curse of the Daleks props have an un-sanded ridge. The collar screws which mount the collars to the shoulders are positioned differently to Daleks which had been built before, plus the manner in which the neck cage aligned with the shoulder section is asymmetrical - unlike the Daleks from the first movie.
All this evidence confirms that the Curse props were built in late November or early December 1965. But as with every aspect of Dalek history, all is not as it seems.
Taking into account the above analysis, it would at first appear contradictory to learn that fellow researcher Mark Dando reported Bill Roberts recalling that film Daleks were used in the stage play to save money. Since the play had a modest budget, this would indeed have made sense. Furthermore, to add to the confusion, the programme notes appear to back up what Bill Roberts said, with a credit to AARU for supplying the Daleks. So which version of events is wrong? As it turns out, perhaps nether. All the evidence actually agrees, once it is interpreted slightly differently.
If AARU was credited for supplying the expensive Daleks, and Bill Roberts recalls dual use of stage and film props - yet it is a certainty that the Curse props were brand new - then it reveals an enterprising deal must have been struck.
In the winter of 1965 AARU was preparing to make a second feature film starring Peter Cushing opposite the Daleks. Official confirmation came in the press on 16th December 1965, less than a week before the play was due to open. So, when The Curse of the Daleks required five brand new props, the opportunity was there for the play and the film to share the use of a new set of props which would ultimately end up being used by Milton Subotsky's cinematic production. It would have made sense for John Gale to strike an agreement whereby AARU funded the purchase of the props and the play contributed by hiring them. This reconciles Bill Roberts' recollections of prop-recycling with the fact that new props were made, and it explains the credit to AARU in the programme.


Curse Daleks with their hemisphere misalignment

The Curse of the Daleks required one Dalek to have
a "Lamp Attachment" instead of a sucker - and
the second Movie shows what is often referred to
as a "silver sucker"

The Dalek with which Jill Curzon poses, featuring
Curse-style gun and unusual pincer

Unusual Attachments

The storyline of the play was set after the original Dalek serial and therefore the style of prop was intended to exactly match the creatures as they had first appeared, rather than the solar-panelled versions which debuted in The Chase. A perhaps surprising concession towards continuity, but it would also mean quicker construction.
As with all props built since February 1965, the moulds created for the first movie were employed and thus the props had flat-top gunboxes, and misaligned hemispheres. As mentioned, unlike the props from the first movie, the prominent seams which were produced in the mould for the shoulders were not sanded down and they can be seen between the gunboxes.
The Curse scripts required additional Dalek attachments. One Dalek had a torch-attachment in place of the sucker, and the light was used to activate sensors to open hidden doors. The script also called for Daleks equipped with claws. Yet another important fact which provides circumstantial evidence that connects the play to the second film.
The second movie, which began shooting approximately two weeks after the play ended, showed Daleks with a miscellaneous collection of attachments which are irrelevant to the narrative of the film. The new movie Daleks had claws that had never been seen on screen before, and one Dalek is famous for having what is usually referred to as a "silver sucker" - however on closer inspection the attachment is not a rubber sucker at all, but a small, reflective cone - basically a lampshade - complete with a socket inside of the correct size to accommodate a bulb.
Cooperation between the respective producers of the play and film meant that by sharing props, the unusual attachments from the play would end up on the big screen, perplexing all those who glimpsed the so-called "silver sucker" which functioned as a Dalek-style illumination-device in its former life.
Further evidence of a metamorphosis from play props into Movie Daleks could be seen when actress Jill Curzon was photographed with a Dalek as part of the publicity for her role in the second movie. In the Curzon photo a blend of two Dalek styles is revealed. The prop was fitted with slats as per the requirements for the second movie, but it carried a gun with internal spokes, as per the design of the stage play props. It also has an claw attachment unrelated to those in the first movie, and it has a black eye-stalk pivot as per the Black Dalek from the stage play. The eye-pivot is carelessly striped with silver paint, showing evidence of a recent hasty refurbishment into its silver livery.
When the Movie Daleks went before the film cameras on Monday 31st January 1966, the five Daleks which had appeared on stage were all recycled - however their modifications were incomplete and their condition was deteriorating, as will been examined during The Daleks Invasion Earth: 2150AD.

0 comments:

Post a Comment